Single Setting Torque Wrenches

Description

Tightening with the correct torque minimizes the risk of the screw working loose and improves the precision during bridge fabrication. Torque control can also reduce the risk of stress being built into the restoration and prevent component fractures.

This wrench is a pre-calibrated torque wrench system that prevents over and under tightening of implant screws and abutments. It is available in 10Ncm, 20Ncm, 30Ncm, and 35Ncm settings to meet the needs of a variety of implant systems. An assortment of drivers fit all the hex or slot head screws regardless of implant type.

Insert the screw or abutment into the implant with the  driver and tighten with finger pressure. Remove the driver and place into the wrench. Pre-load the screw by using the wrench in the same way as a ratchet wrench. The wrench clutch will disengage when the pre-calibrated torque is applied.